Fitting guide

Overgrip Installation Instructions

Follow these simple steps to fit your overgrip.

  1. Step 1 — Remove the black adhesive tape around the overgrip and set it aside.

    Step 1

    Remove the black adhesive tape around the overgrip and set it aside.

  2. Step 2 — Remove the transparent film running along the overgrip.

    Step 2

    Remove the transparent film running along the overgrip.

  3. Step 3 — Remove the small adhesive tab at the narrower end of the overgrip.

    Step 3

    Remove the small adhesive tab at the narrower end of the overgrip.

  4. Step 4 — Start wrapping the overgrip from the bottom of the handle, making 3 turns over itself.

    Step 4

    Start wrapping the overgrip from the bottom of the handle, making 3 turns over itself.

  5. Step 5 — Continue wrapping upwards, overlapping the overgrip by about 50% on each turn.

    Step 5

    Continue wrapping upwards, overlapping the overgrip by about 50% on each turn.

  6. Step 6 — Work up to the top of the handle and, if needed, trim off the excess overgrip.

    Step 6

    Work up to the top of the handle and, if needed, trim off the excess overgrip.

  7. Step 7 — Wrap the black finishing tape around the end of the overgrip.

    Step 7

    Wrap the black finishing tape around the end of the overgrip.

  8. Overgrip fitted — Your overgrip is fitted and ready to play.

    Overgrip fitted

    Your overgrip is fitted and ready to play.

Discover the Overgrip